"Your Turntable's Best Friend!"     
Integrityhifi Canada, automatic tonearm liter
Maker of tru-lift, automatic tonearm lift
Integrityhifi Canada, automatic tonearm lift
Maker of tru-lift, automatic tonearm lift
<meta name+"p:domain_verify"content+"8220d762ddbc694151fd70cbd68027c4"/>

fbq('track', 'Lead');

fbq('track', 'Search');



    Integrityhifi Canada   

  Maker of TRU-LIFT & TRU-KLEEN 

Tru-Lift Automatic Tonearm Lifter Specs & Set up

 Choosing the correct model & Set up instruction

automatic tonearm lifter

With the platter stopped and needle sitting on the record - as Shown in the diagram. 

Carefully measure the distance from the top of the plinth to the underside of the tonearm.  Please Refer to the "X" in the diagram.

1. Choosing The Right TRU-LIFT for your table - Watch video below.

TRU-LIFT  SETUP
2. Step by Step instructions on how to correctly set up on your table after purchase - See Guide below from A-E.

automatic tonearm lifter

A.  Measuring the distance between plinth & tonearm.  With the platter stopped & the needle sitting down on the record (still position), measure the distance from the top of the turntable plinth to the underside of tonearm.  


B.  Allowing for clearance between tonearm & TRU-LIFT.  (As shown in the picture B - reduce 1/16" from picture A).  Reference picture A - measures 1.5" & picture B is reduced to 1 7/16".


C.  With the Supplied Allen Key - Loosen set screw on the side of the TRU-LIFT and raise to desired height.


D.  Aligning TRU-LIFT with the runout groove.  ( please refer to the "yellow laser line").



IMPORTANT / CAUTION:  Platter must be in STOPPED POSITION to proceed with the next step.


E.  With the Tonearm cued up and TRU-LIFT in the ready primed position, Place TRU-LIFT between the tonearm base & the record.  (Tonearm should be touching the "trip Release" antenna at this point).  

3. Set up & Placement - Watch video below.

4. Fine Tuning Sensitivity Adjustment - Watch video below 

More Videos on "Sensitivity Adjustment"

Summary Video on "Set up" of Tru-Lift

googledea099b18f0eb21f.html